Mitsubishi Electric MSZ-GE60VA Manual De Instrucciones página 8

● OPERATING INSTRUCTIONS
W
EEKLY TIMER OPERATION
• A maximum of 4 ON or OFF timers can be set for individual days of the week.
• A maximum of 28 ON or OFF timers can be set for a week.
Note:
The simple ON/OFF timer setting is available while the weekly timer is on. In
this case, the ON/OFF timer has priority over the weekly timer; the weekly timer
operation will start again after the simple ON/OFF timer is complete.
Setting the weekly timer
* Make sure that the current time and day are set correctly.
1
Press to enter the weekly timer setting mode.
2
Press and to select setting day and number
Pressing selects the day of
the week to be set.
* All days can be selected.
En-7
All manuals and user guides at all-guides.com
●
* blinks.
.
E.g. : [Mon Tue ... Sun]
and [1] are selected.
Pressing selects
the setting number.
3
Press
, , and
Pressing
selects ON/OFF timer.
Pressing
adjusts the time.
Pressing
deletes timer setting.
* Hold down the button to change the time quickly.
Press and to continue setting the timer for
other days and/or numbers.
4
Press to complete and transmit the weekly timer setting.
Note:
• Press to transmit the setting information of weekly timer to the indoor
unit. Point the remote controller toward the indoor unit for 3 seconds.
• When setting the timer for more than one day of the week or one number,
does not have to be pressed per each setting. Press
ter all the settings are complete. All the weekly timer settings will be saved.
• Press to enter the weekly timer setting mode, and press and hold
for 5 seconds to erase all weekly timer settings. Point the remote
controller toward the indoor unit.
5
Press to turn the weekly timer ON. (
* When the weekly timer is ON, the day of the week whose timer setting
is complete, will light.
Press again to turn the weekly timer OFF. (
goes out.)
Note:
The saved settings will not be cleared when the weekly timer is turned OFF.
Checking weekly timer setting
1
Press to enter the weekly timer setting mode.
* blinks.
2
Press or to view the setting of the particular
day or number.
Press to exit the weekly timer setting.
Note:
When all days of the week are selected to view the settings and a different set-
ting is included among them,
to set ON/OFF, time, and temperature.
E.g. : [ON], [6:00]
and [24°C] are
selected.
Pressing
adjusts the tem-
perature.
* which was blink-
ing goes out, and the
current time will be
displayed.
once af-
lights.)
will be displayed.