Mitsubishi Electric MSZ-GE60VA Manual De Instrucciones página 9

C
LEANING
Instructions:
• Switch off the power supply or turn off the breaker before cleaning.
• Be careful not to touch the metal parts with your hands.
• Do not use benzine, thinner, polishing powder, or insecticide.
Air fi lter (Nano platinum fi lter)
Clean every 2 weeks
•
• Remove dirt by a vacuum cleaner, or rinse with water.
• After washing with water, dry it well in shade.
What is "Nano platinum fi lter" ?
Nano platinum is a ceramic particle that includes a platinum nanoparticle.
The particles are incorporated into the fi lter material, which results in pro-
viding semi-permanent antibacterial and deodorizing characteristics for the
fi lter. Nano platinum surpasses the catechin (a biofl avonoid that is found
in green tea) in performance. Nano platinum fi lter uses this compound not
only to improve air quality but also to eliminate bacteria and viruses. This air
fi lter has a semi-permanent lasting effect even after washing it with water.
Front panel
Hinge
Hole
Air outlet and Fan (before cleaning, make sure that the fan is stopped)
1
Turn the horizontal vanes down-
ward. Then, remove the upper
vane as shown in and
• Repeat and for the lower vane.
Unlock
Upper vane
4
Put the vertical vanes back to their
original positions correctly one by
one, into their respective guide.
• Push the vanes until they click into place.
Guide (catch)
All manuals and user guides at all-guides.com
1. Lift the front panel until a "click" is heard.
2. Hold the hinges and pull to remove as shown in the left illustration.
• Wipe with a soft dry cloth or rinse it with water.
• Do not soak it in water for more than two hours.
• Dry it well in shade.
3. Install the panel by following the removal procedure in reverse. Close the front
panel securely and press the positions indicated by the arrows.
2
Swing out the two vertical vanes
one by one.
.
5
Install the horizontal vanes by
following the removal procedure
in reverse.
• If the horizontal vanes are not installed
correctly, all LED lamps blink when power
is turned on.
• Use only diluted mild detergents.
• Do not expose parts to direct sunlight, heat, or fi re to dry.
• Do not use water hotter than 50°C.
Heat exchanger
• Wear gloves to protect your hands.
• Use the QUICK CLEAN KIT
(option).
Parts Number MAC-093SS-E
• Refer to the instructions described in the
QUICK CLEAN KIT for details.
Air cleaning fi lter
(Electrostatic anti-allergy enzyme fi lter, option)
Every 3 months:
• Remove dirt by a vacuum cleaner.
When dirt cannot be removed by vacuum cleaning:
• Soak the fi lter and its frame in lukewarm water before rinsing it.
• After washing, dry it well in shade.
Every year:
• Replace it with a new air cleaning fi lter for best performance.
• Parts Number MAC-2310FT-E
Important
• Clean the fi lters regularly for best performance and to
reduce power consumption.
• Dirty fi lters cause condensation in the air conditioner
which will contribute to the growth of fungi such as
mold. It is therefore recommended to clean air fi lters
every 2 weeks.
3
Clean the air outlet and fan.
• Wipe with a soft dry cloth.
Clean the fan.
• Use the QUICK CLEAN KIT (option).
Parts Number
• Refer to the instructions described in the
QUICK CLEAN KIT for details.
Note:
Do not apply excessive force to the fan or fan guard.
MAC-093SS-E
En-8