Installation Instructions - Lanaform Family Care Manual De Instrucciones

COMPONENTS
EN
1 - Handle
2 - Vaporiser
3 - Reservoir
4 - Reservoir plug
5 - Vent
6 - Sensor
7 - Base
8 - Main switch
9 - Steam intensity control
10 - Water level detector
INSTRUCTIONS FOR USE
Characteristics :
• Water reservoir with a 5 L capacity
• More than 12 hours continuous operation.
• An automatic device shuts down the unit if the reservoir is empty.
• High quality sensor guarantees correct and long lasting operation.
• Releases anions in abundance, favours cell metabolism, increases energy and appetite, cleans blood and calms nerves.
• Easily refillable water reservoir.
• Silent and economical
• Increases and controls the relative humidity in the room.
• Eliminates electrostatic charges.
• Improves ambient air quality
• Helps maintain good health and protects the skin
• Regulates room temperature.

Installation instructions

• Place the unit in the room half an hour before turning it on, so that it may take the surrounding temperature.
• It is recommended to use the unit in a temperature located between 5°C and 40°C and with a relative humidity of less
than 50 % RH.
• Remove the reservoir from the unit; unscrew the plug by swiveling it counterclockwise.
• Fill the reservoir with clear water at 40°C maximum. Check that the silicone washer is in place, and then close the cover
by turning it clockwise.
• Make sure it is clean and waterproof then place the reservoir delicately on the base unit.
• With dry hands, plug in the unit.
• Turn on the device by pressing on the ON/OFF button. The main light turns on and the device starts working. (8)
• Adjust the desired steam intensity by turning the steam intensity control button. (9)
4
All manuals and user guides at all-guides.com
2
4
10
9
8
1
3
5
6
7