Installation And Operation Manual - Simon, Evers & Co K 176 333 Instrucciones De Manejo Y Mantenimiento

Installation and Operation Manual

I. Description
Hose winders feature an automatic winding function. lt is powered by an encapsulated lubricated
spring. Working with a desired hose length is made possible by several catch locations per rotation.
To avoid personal injury or material damage read the instructions carefully before starting to use the
winder.
The hose winder has been inspected for quality and function before delivery.
II. Important indications
1. Read instruction and make it available to operators on the device before using it.
2. Operator must be instructed properly with the device.
3. Arbitrarily retrofitting and modifications to the hose winder will cancel the warranty.
4. Check the device regarding damages, unfastened screws or twists before using it and eliminate
failures.
5. Repair works on Hose Reels devices shall only be carried out by the manufacturer or an
instructed repair shop respectively by using spare parts.
6. Non-observance of the instruction, improper use, and corrosion by insufficient protection or
product alterations without authority result in the expiry of the warranty.
7. Risk of corrosion in case of continuous contact with unfavourable atmospheric conditions as for
example high humidity or harmful environmental influences as for example atmospheres with
acid vapours, corrosive gases or high dust concentration cause early wear. This effectuates no
claim under warranty.
8. Further information or spare part lists will kindly be provided by us or your specialist dealer.
III. Security advices
1. Supply pressure may not exceed the operational pressure specified on the type plate.
2. Connected devices have to be in perfect condition and be designed for the intended operational
pressure.
3. Pressurised parts can be get loose if handled improperly and pose a danger.
4. Keep hose away from sharp and hot objects! Leakage tests should be carried out with water.
5. During the winding of the hose always hold the loose end tight to prevent uncontrolled winding.
6. Regular inspection of the hose winder helps avoid damages and accidents.
7. Defective parts and hoses must be replaced promptly.
4