How To Use; Turning On/Off - Jya Smartmi Serie Manual De Usuario

How to Use

Turning On/Off

Tap the power button to turn on the purifier. While
the purifier is on, tap the power button to turn it off.
Display Instructions
After power on, the main screen will rotate in the main interface of PM2.5, PM10, TVOC in turn.
PM2.5 Interface
Air Quality Indicator
The indicator will display green, yellow, orange or red
according the worst value of PM2.5、TVOC、 PM10.
Note: PM10 refers to coarse particles have an aerodynamic
diameter ranging from 2.5 to 10μm (PM10–PM2.5). Examples of
coarse particles include dust, pollen, spores, and fly ash.
Note: Upon activation, the Gas sensor inside this purifier takes
the air quality as the initial standard value. If there are changes
in the air TVOC during operation, the Gas sensor will perform
calculations based on the current indoor air quality (IAQ). The
TVOC is displayed according to 4 different levels, and the air
quality indicator status also changes accordingly.
PM10 Interface
PM2.5
PM10
TVOC
TVOC Interface
1-20 μg/m
Excellent
3
21-35 μg/m
Good
3
35-55 μg/m
Moderate
3
＞ 55 μg/m
Unhealthy
3
Excellent
Good
Moderate
Unhealthy
Excellent
Good
Moderate
Unhealthy
05