Jya Smartmi Serie Manual De Usuario página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24
Filter and Replacing the Filter Instructions
Make sure to turn off the air purifier and disconnect power before replacing the filter.
Note: To avoid injuries, do not stick your fingers in between the top and the bottom part when opening or
installing the filter compartment.
Filters should be
replaced every
6–12 months
Filter Status
Checking Filter Lifespan
Swipe left on the main screen, switch to
filer lifespan remaining and filter resetting
interface, you can check the filter lifespan
remaining.
Filter Replacement Reminder
When the filter lifespan is less than 10%, a
reminder of the expiration will pop up on
screen, tap the prompt to jump to the filter
lifespan remaining and reset interface, the
reminder will pop up the next time when the
device is turned on or every 24hrs.
Filters should be replaced every 6–12 months.
Please replace the filter as soon as possible
to ensure normal operation and optimal air
purification.
How to replace filter
Opening the filter
1
compartment
Press and hold the release
buttons with both of your
hands, and lift up the upper
compartment of the purifier.
Removing the old filter
2
Remove the old filter upwards.
Installing the new filter
3
Install the filter into the
filter compartment, and
then place back the upper
compartment of the purifier.
Resetting the filter
4
Swipe left on the main screen,
switch to filer lifespan remaining
and filter resetting interface,
click "Reset" and "Confirm",
filter reset successfully, and the
purifier restarts to calculate the
filter lifespan.
08

Publicidad

Tabla de contenido
loading

Productos relacionados para Jya Smartmi Serie

Este manual también es adecuado para:

Smartmi fjord

Tabla de contenido