Setup; Power Requirements; Installing The Handle Bracket And Corner Safety Bumpers (Cscstorage1Uvc); Door Locks - Tripp-Lite CSCSTORAGE1UVC Manual Del Propietário

4. Setup

Caution! Read All Instructions and Warnings Before Installation!
Warning: Storage carts can be extremely heavy. Do not attempt to unpack the storage cart without assistance. Follow the
unpacking instructions document that shipped with this product before proceeding with setup. Use extreme caution when
handling the storage cart and be sure to follow all handling and installation instructions. Do not attempt to install equipment
without first stabilizing the storage cart.

4.1 Power Requirements

An AC outlet with a 15- or 20-amp (NEMA 5-15R or NEMA 5-20R) AC circuit is recommended for powering the storage cart. The AC outlet used to
power the storage cart should not be shared.

4.2 Installing the Handle Bracket and Corner Safety Bumpers (CSCSTORAGE1UVC)

Install the handle assembly on the back of the unit, above the vented door. Using the included hex key tool and four (4) hex screws, secure the handle
bracket to the cart . Then install the two top corner safety bumpers using eight (8) hex screws (four per bumper)
A
A

Door Locks

The split doors contain a lock that is accessible with the included keys.
B
5
.
B