MQuvee SW-12 Manual Del Propietário página 6

Down Control Panel
ON/OFF of the down zone system
ON/OFF of inside cabinet LED light
Temperature Up setting
Temperature Down setting
3.1.3 Change temperature display
Pushing the temperature key up and down for 5 seconds, then,
temperature display will be exchange between °C and F° .
3.2 THE TEMPERATURE SETTING OF SW-24
1 2
1. Temperature UP, the upper zone's temperature increases 1°C each
time the button Is pressed.
2. Temperature DOWN, the upper zone's temperature decreases 1 °C
each time the button is pressed.
10
3 4 5 6
Upper Zone Temperature Display
3. Temperature UP, the lower zone's temperature increases 1 °C each
time the button is pressed.
4. Temperature DOWN, the lower zone's temperature decreases 1 °C
each time the button is pressed.
Lower Zone Temperature Display
5. Choose the mode of LED light
a) Mode 1 (Default setting): ECO, the panel will show ECO that
means the LED light is under Mode 1, at that time, the LED light
will be ON/OFF automatically when door open/close.
b) Mode 2 : when you press the LED light button for 5 seconds,
ECO on panel will disappear, at that time, the LED light is under
Mode 2, the LED light will be ON, but it will OFF automatically
after 4 hours.
6. Turn the Power ON and OFF.
7. Toggle the LED display between Celsius or Fahrenheit readings -
Press Button 1 and Button 2 simultaneously for 3 seconds to toggle
the LED display between Celsius or Fahrenheit readings.
8. Door alarm, when the door open for 60 seconds, the alarm will sound
and the panel will show H1.
11