WARNING:
Always ware safety goggles or safety
glasses with side shields and a full face shield when
operating this product. Failure to do so could result in
objects being thrown into your eyes and other possible
serious injuries.
APPLICATIONS
You may use this product for the purpose listed below:
◾
Cleaning small areas and light working conditions such
as courtyards, walkways, and garages.
USING THE SNOW SHOVEL ATTACHMENT WITH
POWER HEAD
WARNING:
Never use snow shovel attachment on
frozen lakes, rivers or similar surfaces. Death or serious
injury could occur if the ice breaks.
WARNING:
Never use the snow shovel attachment
on a rooftop or other unstable surface, which can result in
death or serious injury.
WARNING:
Do not use the snow shovel attachment
on ice, which can cause the operator to slip and fall,
resulting in possibly serious personal injury.
WARNING:
Do not wear loose clothing, scarves, or
jewelry. They can be caught in moving parts and cause
death or serious personal injury.
WARNING:
Never point the snow shovel attachment
in the direction of people or pets. Thrown snow or other
objects can cause serious personal injury.
WARNING:
Make sure that the area to be cleared
is free of stones, sticks, wires, gravel, and other objects
that could be accidentally thrown by the snow shovel
attachment in any direction and cause serious personal
injury to the operator and others.
When using the snow shovel attachment, hold the tool with
a firm grip with both hands while in operation (Fig. C).
◾
Take notice of the direction of the wind before
beginning. When possible, discharge snow in the same
direction as the wind to prevent snow from being
thrown back into your face.
◾
Some parts of the snow shovel attachment can freeze
under extreme weather conditions. Do not attempt to
operate the tool with frozen parts.
◾
If the tool contacts with any type of obstruction during
operation, stop it and remove the battery pack. Check
the tool carefully before using.
◾
If the snow is too thick and deeper than the clearing
depth, it may take more than one pass to clear.
When finished, let the tool run for a few minutes to allow all
snow to clear the auger before storing.
TO START/STOP THE TOOL
See "STARTING/STOPPING THE POWER HEAD" section
in the power head PH1400E operator's manual.
DEFLECTOR ADJUST KNOB (Fig. D)
The discharge direction of this snow shovel attachment
can be changed by rotating the deflector adjust knob left,
forward, or right.
The maximum adjusting range of the knob is 60°
(30° to the left or right).
The knob will be locked when it is in the leftmost or
rightmost position. Press the knob and rotate it in reverse
to unlock it.
D-1 Lock Indicator
D-2 Deflector Adjust Knob
MAINTENANCE
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
When cleaning the snow shovel
attachment, DO NOT immerse it in water or other liquids.
MOUNTING AND DETACHING THE SCRAPER BAR
1. Remove the battery pack from the power head.
2. Lay the snow shovel attachment on its side or any
other convenient position for scraper bar service.
3. Remove the four screws in the front of the scraper
bar, as well as the two screws at both ends. Use a
screwdriver (not included) to unscrew them (Fig. E & F).
E-1 Scraper Bar
4. Replace the worn scraper bar with a new one, if
necessary.
5. To reassemble, insert a new scraper bar, with the six
holes aligned, insert the six screws into the holes and
secure them with a screwdriver (not included).
SNOW SHOVEL ATTACHMENT — SSA1200
EN
9