Installation Instructions; Tools You Will Need - Midea MAW12HV1CWT Manual Del Usuario

INSTALLATION INSTRUCTIONS

WARNING - Before You Begin
Read these instructions completely
and carefully.
• IMPORTANT - Save these instructions.
• IMPORTANT - Observe all governing
codes and ordinances.
We recommend that two people
install this product.
Proper installation is the responsibility
of the installer.
Product failure due to improper
installation is not covered under the
Limited Warranty.
You MUST use all supplied parts and
use proper installation procedures as
described in these instructions when
installing this air conditioner.
Do not, under any circumstances, cut
or remove the third (ground) prong
from the power cord.
Do not change the plug on the power
cord of the air conditioner.
Aluminum house wiring may present
special problems - consult a qualified
electrician.
When handling the air conditioner, be
careful to avoid cuts from sharp metal
edges and aluminum fins on front and
rear coils. Please wear cut-resistant
gloves.
Bracket should only be used for
its intended purpose. If not, the
warranty will be voided.
 Page 8 

Tools You Will Need

Installation Hardware
(For Wooden windows)
(For Vinyl-Clad windows)
Weather stripping
(10"×1-1/2"×1/6")
Window sash seal foam
Some assembly is required. Please read these
instructions carefully.
NOTICE
• SAVE CARTON and these
INSTALLATION INSTRUCTIONS for
future reference. The carton is the best
to store unit during winter, or when not
in use.
• DO NOT USE ANY SCREWS OTHER
THAN THOSE SPECIFIED HERE.
• FOR SAFETY REASONS, THE TOP RAIL
MUST BE SECURELY FASTENED WITH
ALL FOUR (4) SCREWS.
Phillips
Screwdriver
Drill
(If pilot holes are needed)
1/2" Screws
Lock frame
Lock frame
Sash lock
3/8" Screws
Top Rail
7
2
2
1
2
1
4
1