Vacmaster AM201 0101 Manual Del Usuario página 10

CORD STORAGE
1. Before storing the air mover, ensure the power switch is turned to the OFF position, and unplug
the unit from the power outlet.
2. Wrap the cord around the base of the handle.
3. Use the attached cord clip to hold the cord in place.
STORING THE AIR MOVER
To conserve space while storing multiple units, this air mover can be stacked together with multiple
additional units, as illustrated above.
To stack, the pegs on the intake grill on the power switch side of the unit must be inserted into the
peg receiver on the opposite side of the partner unit.
WARNING:
DEVICES ARE REINSTALLED BEFORE USE, INCLUDING INTAKE GRILLS, AIR
DISCHARGE GRILL, AND IMPELLER.
MAINTENANCE BEFORE AND AFTER EACH USE
1. Inspect the plug and the cord to ensure that it has not been damaged during operation or
between uses. If the plug or cord is damaged, do not use the air mover and replace the
damaged part immediately.
2. Check the air intake and air discharge grills and make sure they are free of blockage.
MAINTENANCE
AFTER HAVING SERVICED, ENSURE ANY PROTECTIVE OR SAFETY
10