Commissioning, Operation - WIKA A2G-60 Manual De Instrucciones

4. Transport ... / 5. Commissioning, operation
Store the instrument in its original packaging in a location that fulfils the
conditions listed above. If the original packaging is not available, pack
and store the instrument as described below:
1. Wrap the instrument in an antistatic plastic film.
EN
2. Place the instrument, along with the shock-absorbent material, in the
packaging.
3. If stored for a prolonged period of time (more than 30 days), place a
bag containing a desiccant inside the packaging.

5. Commissioning, operation

Personnel: Skilled electrical personnel
Tools: Voltage tester, screwdriver
WARNING!
Physical injuries and damage to property and the
environment caused by hazardous media
Upon contact with hazardous media (e.g. oxygen, acetylene,
flammable or toxic substances), harmful media (e.g. corrosive,
toxic, carcinogenic, radioactive), and also with refrigeration
plants and compressors, there is a danger of physical injuries
and damage to property and the environment.
Should a failure occur, aggressive media with extremely high
temperature and under high pressure or vacuum may be
present at the instrument.
▶
CAUTION!
Damage to the instrument
When working on open electric circuits (PCBs) there is a
risk of damaging sensitive electronic components through
electrostatic discharge.
▶
12
For these media, in addition to all standard regulations,
the appropriate existing codes or regulations must also be
followed.
The correct use of grounded working surfaces and
personal armbands is required.
WIKA operating instructions model A2G-60