WIKA A2G-60 Manual De Instrucciones página 22

8. Specifications
Electronic ventilation duct temperature sensor, model A2G-60
Output, sensor
Temperature probe
EN
Transmitter, voltage
output
Transmitter, current
output
Power consumption
Transmitter, voltage
output
Transmitter, current
output
Electrical connection,
cable entry
Insertion length
Material
Probe sleeve
Case
Mounting clip
Permissible temperatures
Head
Probe sleeve
Ingress protection per
IEC/EN 60529
Supply voltage U
Transmitter, voltage
output
Transmitter, current
output
22
Pt1000
■
Ni1000
■
Available in 2-, 3- or 4-wire connection
0 ... 10 V or 0 ... 5 V, min. load 5 kΩ
4 ... 20 mA, max. load 500 Ω (2-wire)
0.4 W (24 V =), 0.8 VA (24 V ~)
0.5 W (24 V =)
Removable plug-in terminal, max. 2.5 mm² /
Flextherm M20, for cable with Ø 4.5 ... 9 mm
[0.18 ... 0.35 in]
50 ... 300 mm [1.97 ...11.81 in]
■
(in 50 mm increments / in 1.97 in increments)
450 mm [17.72 in]
■
Stainless steel 1.4571
Polycarbonate, pure white
Polycarbonate, pure white
Temperature probe
Transmitter
-50 ... +160 °C [-58 ... +320 °F]
■
-80 ... +260 °C [-112 ... +500 °F]
■
IP65
B
15 ... 24 V = (±10 %) or 24 V ~ (±10 %) SELV
15 ... 24 V = (±10 %) SELV
WIKA operating instructions model A2G-60
-35 ... +90 °C [-31 ... +194 °F]
-35 ... +70 °C [-31 ... +158 °F]