Secure Gas Cylinder - Blumfeldt Heatwave Manual Del Usuario

EN
26

SECURE GAS CYLINDER

1. Secure the two straps with 4 bolts (M5x12), washers (M5) and nuts (M5)
inside the rear unit casing.
2. Place the gas bottle in the gas bottle housing.
3. Connect the gas bottle to a gas pressure regulator. For correct connection
to the gas cylinder, follow the operating instructions for the gas pressure
regulator.
4. Connect the gas bottle straps as shown above. The straps must have a
suitable tension for the gas cylinder.
Note: Make sure that the gas cylinder straps do not put any strain on the gas
pressure regulator.