Using the Timer
Before using the timer for extended periods,
check that the batteries have enough
charge. Replace the batteries when the
low battery indicator (
display panel (
).
Manual Release
The TR-90 shutter-release button (
functions in much the same way as the
camera shutter-release button.
1. Adjust Camera Settings
Connect the TR-90 and turn the camera
En
on. Choose exposure mode, shutter speed,
focus mode, and shooting mode as desired.
2. Take Pictures
2.1 Press the TR-90 shutter-release button
) flashes in the
(
) halfway and check focus and exposure,
then press it the rest of the way down to
take a picture. While the shutter is open, a
beep will sound at one-second intervals, the
"RELEASE" indicator (
)
display panel will show the time remaining
until the shutter closes.
To keep the shutter-release button fully
pressed for bulb photography, slide the
button to the HOLD position. Slide it in the
INSTRUCTION MANUAL
opposite direction to release the lock.
2.2 Release the button to end shooting
The TR-90 shutter-release button can be used
) will flash, and the
when no batteries are inserted. The display
panel will remain off and no beep will sound.
15