25
5
BEFORE EACH USE
1.
Tire pressure: Make sure your tires are sufficiently inflated for the use
you intend. You can refer to our recommendations in the «tire pressure»
section. The recommanded tire pressure on the different types of Lundi
20 is 3.5 bar rear and 2.5 bar front. Be careful not to exceed the maximum
pressure indicated on the sidewall of each tire.
2.
Checking the steering play: When stopped, with the front brake
locked, move the bike back and forth a little. If you feel any
mechanical clearance or hear an abnormal noise, it means that the
headset is loose. If in doubt, contact your retailer.
3.
Check that the handlebar is tight as
shown in the picture on the right. With
the front wheel clamped between your
legs, turn the handlebar from left to
right to check that it is tight. If there is
any mechanical clearance, tighten the
2 screws on the handlebar.
4.
Check the parts for wear: Visually check the general condition of
the bike and the safety elements such as brakes, hoses, and tires,
and that all the elements are properly fixed. If in doubt, contact your
retailer.