habitat et jardin Bingo 5 Manual Del Usuario página 10

Connecting and disconnecting the gas bottle
Use a standard leak detector to ensure all
connections are tight.
Confirm all barbecue control knobs are in the off
Open the gas control valve on gas cylinder. Check for leaks by
brushing soap solution over all gas system joints, including all
valve connections, hose connections and regulator connections.
NEVER USE AN OPEN FLAME to test for leaks at anytime.
If bubbles form out of any of the tank there is a leak. If the
connection is not sealed, immediately close the bottle valve
(turn the operating level G2 to the 3 o clock position) and tighten
the connection or replace the leaking part. Repeat the leak test
annually, and whenever the gas cylinder is repaired or
replenished.
7.6m
9 o'clock
.
positio n.
" "
Shutting off the gas bottle (Fig.2-A, 2-B)
9 o'clock
Or anti-clockwise rotate the nut on regulator G1 to release the
regulator G1.
2-A
G1
G2
9
G3
G4
10
2-B
G2
G4