Product Description - Iluminarc LOGICPOEX Guía De Referencia Rápida

Product Description

The LOGIC POE X is a Power Over Ethernet interface designed to connect LOGIC MR16 DN S products to the
LOGIC DRIVE 2X and send data without power from the LOGIC DRIVE 2X to LOGIC products farther away than power
will reliably go over CAT6 cabling. It features 3 ethernet ports: 1 INPUT, 1 THRU (data only), and 1 OUTPUT (power and
data). Use of the THRU port requires the addition of a POE injector before connecting to LOGIC products.
DC Power
This product is powered by the LOGIC DRIVE 2X via a CAT6 connection of 52 VDC. Download the User Manual for the
LOGIC DRIVE 2X from
Power Linking
You can link up to 9 LOGIC MR16 DN S products from one output of the LOGIC DRIVE 2X via the LOGIC POE X.
Product Overview
Front Panel Description
# Name Function
1 INPUT Inputs power (52V) and data signal from the LOGIC DRIVE 2X
2 THRU Outputs data signal only (for long-distance transmission; requires power injection at destination)
3 OUTPUT Outputs power (48V) and data signal
Mounting
Before mounting this product, read the
weight of the product.
The LOGIC POE X has 2 four-directional tear-drop holes on the bottom for hanging on a wall or securing to a surface.
Mounting Diagram
Feet for surface
mounting (x4)
Four-directional tear-drop holes
LOGIC POE X QRG Rev. 2
QUICK REFERENCE GUIDE
www.iluminarc.com for more details.
1
Safety Notes. Make sure the mounting hardware is capable of supporting the
Mounting surface or wall
2 3
0.68 in
17.2 mm
0.68 in
17.2 mm
2.08 in
52.8 mm
2.76 in
70 mm
3.43 in
87.2 mm
EN
2