B127A-4X2-Bh2Ph - Tripp-Lite B127A-4X2-BH2PH Manual Del Propietário

Installation
B127A-4X2-BH2PH Installation
Notes:
•
Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
•
To achieve maximum distance and performance, use 24 AWG solid wire Cat6
cable. Using stranded wire Cat6 cable or cable with a gauge (AWG) size higher
than 24 AWG will result in shorter extension distance. Higher gauge cabling, such
as 26 AWG, has a more limited transmission capability than lower gauge cabling.
All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid wire cabling.
•
The installation diagram shows a B127A-4X2-BH2PH kit, which includes a
quad-input/dual-output switch unit and two B127A-1P0-PH pigtail receiver units.
•
External power is not required for remote receivers due to Power over Cable
(PoC) technology incorporated in the switch.

B127A-4X2-BH2PH

B127A-4X2-BH2PH
Up to 230 ft. (70 m) Cat6 cable at 4K/60 Hz
Up to 230 ft. (70 m) Cat6 cable at 4K/60Hz
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60Hz Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz

HDR PLAYER 4
HDR PLAYER 4
HDR PLAYER 3
HDR PLAYER 3
HDR PLAYER 2
HDR PLAYER 2
HDR PLAYER 1
HDR PLAYER 1
 

6
Scanner/optional
Scanner/optional
IR
IR
SENSOR SENSOR
 
B127A-1P0-PH
B127A-1P0-PH
RS-232
RS-232
IR Control
IR Control
Pad
Pad