Specifications
Maximum pressure:
Input and Regulated flow capacity: Input up to 120 lpm (32 US gpm) and regulated from 0.5 lpm (0.132 US gpm) up
Material:
Weight:
Valve Assembly Fitting
The installation of this valve and associated control components should only be undertaken by suitably qualified
personnel.
Securely mount the valve in position with the bolt holes provided in the body.
•
Make all hydraulic connections to the valve with flexible hose at least 100mm long. Hoses should be clamped to
•
avoid lateral forces on the ports.
Check IP (Ingres Protection) rating before installing in wet areas.
•
Use the information stated on 'Connection Detail' section as a guide to connect the cable to the Power Supply and
•
the Control Signal.
420 bar (6000 psi)
to 110 lpm (30.0 US gpm aprox) dependent on model
Steel components in cast Ductile Iron body painted black
Drive Mechanism mounted on aluminium plate and mild steel bracket.
2.75 kg
3