Start Up; Switching On And Off - Truper ASP-16S Instructivo

Start Up

Switch

Switching on and off

• To turn the vacuum cleaner on, plug the power cord into the
electrical outlet.
• Install the switch in the on position "I" (ON).
• To turn the vacuum cleaner off, install the switch in the "O"
(OFF), position, and disconnect the power cord from the
outlet.
CAUTION • Always check that the switch is in the off
position before connecting the power cord to the outlet.
Blowing
WARNING • Read, understand and follow the
safety warnings on page 5.
• Press the blower release button (A) to detach the blower
from the canister lid (B).
• Remove the noise diffuser (C) from the blower and
attach the adapter (D) in its place.
• Connect the blower nozzle to the adapter. If required, an
extension tube can be connected between the nozzle and
the adapter.
• Turn on the blower.
A
C
B
D
8
ENGLISH