Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ELEMENTS OF LAMPS:
1) REFLECTING SCREEN
2) INFRARED LAMP
3) TIMER (JUST FOR MODEL G.18900-A and
G.18900-A/1 )
4) ANGLE ADJUSTMENT KNOBS OF SCREEN
5) HEIGHT ADJUSTMENT KNOB
6) BASE AND MAIN COLUMN
7) WHEELS
WAY OF USE:
1.
Follow these steps to make a correct use of the product:
2.
Read these instructions carefully.
3.
No assembly is required.
4.
Check the power cable to the mains plug.
5.
Place the base of the lamp on a flat and stable surface.
6.
Make sure the infrared bulb is properly installed.
7.
Adjust the body of the lamp in the desired position.
With the knob (5) , it can be regulated the lamp to the desired height.
The knob (4) regulate the angle of incidence of the screen reflector (1).
8.
Connect the power cable to the network in a proper outlet.
9.
To run the equipment, plug to mains to the right input voltage.
The model G.18900-A /G.18900-A/1 has a timer (3) from 0 to 30 minutes. Turn the key timer to
the desired time.
The patient should be in a comfortable and relaxed position, because the treatment will last for several
minutes. Clothing should be removed from the area to be treated, without any type of cream.
The areas not to be treated should be protected with dry towels.
The duration of treatment should be between 15 and 30 minutes (sometimes 60), depending on the
intensity used and the desired effect. Skin should be supervised during treatment, every 5 minutes,
especially in the early sessions, because heat sensitivity is different in each person. The skin will show
moderate erythema and sweating. You have to attend any burning sensation and unpleasant or
exaggerated erythema, and stop the treatment.
To be able to use the lamp is necessary to have some experience in using that type of devices. Normally
people who uses lamps are physiotherapist.
The position of the patient will depend on the zone to be treated. The patient may be sitting or standing or
lying.
Once the treatment is finished, lamp should be switched-off and dissconected from the plug and then
moved to a safe place.
When the unit has reached its life time should be disposed according to the local goverment laws. Please
get in contact with the local authorities for more information.
Ortotecsa,s.l. C/Peña de Francia,8
Tlf.:+34918719132
USER AND MAINTENANCE MANUAL
28500 Arganda del Rey (Madrid), España.
Fax: +34918719323
email:
Rev. 4. Date: Ag 28, 2020
info@ortotecsa.com
www.ortotecsa.com
pag 6 of 15
Publicidad
Tabla de contenido
