DESCRIPTION
Product specification
Charging and cleaning time may differ depending on the brushes and the conditions of use.
Model
Power consumption (Vacuum cleaner)
Battery specification
Weight (Vacuum cleaner)
Size
Charging time
Combination Tool /
Extension Crevice Tool
Cleaning time
(Default: [MID])
Slim Action Brush
❇ ❇ Cleaning time doubles when you use two batteries consecutively.
Operation
❇ ❇ For detailed information, please
refer to the QR code.
Clean Station
#1 Installing the Clean Station
1 Run the power cord of the Clean Station
along the round groove at the bottom.
– Make sure the power cord is correctly
placed so that the Clean Station stands
without tilting.
2 Before plugging in the Clean Station,
arrange the power cord neatly.
3 When plugging in the Clean Station, the
status indicator turns blue for 5 seconds
and goes off.
Vacuum cleaner
Clean Station
Jet Dual Brush
Wet Brush
VS20A95**** Series
Based on a handy vacuum cleaner: 580 W
Li-ion 25.2 V, 2200 mAh, 7 cell
2.7 kg (Jet Dual Brush)
Width 250 mm x Depth 210 mm x Height 1,000 mm
Width 300 mm x Depth 300 mm x Height 850 mm
Approx. 60 min. [MIN] / Approx. 30 min. [MID] /
Approx. 10 min. [MAX] / Approx. 3 min. [JET]
Approx. 42 min. [MIN] / Approx. 24 min. [MID] /
Approx. 14 min. [MAX] / Approx. 8 min. [JET]
Approx. 50 min. [MIN] / Approx. 25 min. [MID] /
Approx. 15 min. [MAX] / Approx. 9 min. [JET]
Approx. 100 min.
#2 Using the Clean Station
: Status indicator / (START/STOP) button
• After inserting the vacuum cleaner into the
Clean Station, press the START/STOP button
to empty the Dustbin.
– Press the START/STOP button again to stop
its operation.
• Close the bottom cover of the Dustbin
before using the vacuum as the bottom
cover is open after emptying Dustbin at the
Clean Station.
Vacuum cleaner
Charging the battery
❇ ❇ When the battery level indicator turns red
or the [Low battery] message appears on
the display, charge the battery.
3.5 hours
English 13