Before First Use - Haier H2R465SF Manual Del Usuario

EN
4.1 Before first use
Remove all packaging materials, keep them out of children reach and dispose them
in an environmentally friendly manner.
Clean the inside and outside of the appliance with water and a mild detergent before
putting any food in it.
After the appliance has been levelled and cleaned, wait for at least 2 hours before
connecting it to the power supply. See Section INSTALLATION.
Precool the compartment for 2 hours at high settings before loading with food.
The function Super Freeze helps to cool down the compartment quickly.
1
3
4.2
The appliance is in operation as soon as it is connected to the power supply.
The fridge temperature is automatically set to 4 °C. This is the recommended set
-ting and the ideal temperature for storing fresh goods. If desired, you can change
the temperature manually. Please see ADJUSTING THE TEMPERATURE.
Notice: Presettings
1.The appliance is preset to the recommended temperature of 4 °C. Under normal
ambient condition you don´t need to change the temperature.
2. When the appliance is switched on after being disconnected from the main
power supply, it may take up to 12 hours for the correct temperature to be reached.
f
4.3 Standby-mode of display
operation. The display locks automatically. It lights up automatically when
or opening the door.
Different foods should be placed in different
areas according to their properties (Fig: 4.1).
2 1 Pickled foods, canned food, fruit, vegetables,
salad, etc.
2 Eggs, canned food, spices, drinks and bottled
foods, etc.
3 Meat products, snack foods, etc.
4-Use
pressing any key
13