JJ Cole Collections Broadway Manual De Instrucciones página 11

Section 5 - Stroller Operation and Use - Continued
13. To attach the Graco infant car seat:
A . Remove toddler seat by lifting up on the seat
by pressing down on the release latches
B. Locate the infant car seat adapter and rotate
arms until they lock into place.
Note: To fold up infant car seat adapter, push release
1
2
button and rotate arm
Repeat for other side.
C. Lower the infant car seat adapter onto the hinges
until it clicks.
Note: Pull up on the infant car seat adapter to
ensure it is attached.
To remove infant car seat adapter
1
Press release tab and pull up adapter
19
.
up.
2
1
2
.
1
Section 5 - Stroller Operation and Use - Continued
D. Lower the Graco infant car seat into the infant car
seat adapter. The Graco infant car seat should latch
onto adapter shown in the detail view.
Note: Pull up on the Graco infant car seat to
ensure it is attached.
E. Route buckle webbing through the belt path on
both sides of the infant car seat
2
buckle . Tighten strap
seat is held tightly.
14. To remove the Graco infant car seat:
A. Unbuckle the webbing strap over the infant car
seat. Pull release handle
car seat. Pull up on infant car seat
remove.
2
Use only the following Graco infant car seats with the infant
car seat adapter:
• Graco SnugRide
• Graco SnugRide 32
• Graco SnugRide 35
1
. Attach the
3
so that the infant car
1
1
on back of infant
2
to
WARNING
®
®
®
3
2
2
1
20