Flex FX2141R Manual Del Operador página 11

WARNING
making any assembly, adjustments or
changing accessories. Such preventive
safetymeasures reduce the risk of starting the
tool accidentally.
TO ATTACH/DETACH BATTERY PACK (FIG. 2)
To attach the battery pack:
Align the raised rib on the battery pack with the
grooves in the tool, and then slide the battery
pack onto the tool.
NOTICE: Make sure that the latch on the
battery pack snaps into place and that the
battery pack is secured to the tool before
beginning operation.
NOTICE: When placing the battery pack
onto the tool, be sure that the raised rib
on the battery pack aligns with the groove
inside the tool and that the latches snap into
place properly. Improper attachment of the
battery pack can cause damage to internal
components.
To detach the battery pack:
Depress the battery-release button located
on the front of the battery pack, to release the
battery pack. Pull the battery pack out and
remove it from the tool.
WARNING
Therefore, remove the battery when the tool
is not in use or when carrying it at your side.
Detach the battery pack
from the tool before
Battery tool is always in
operating condition.
ASSEMBLY
Fig. 2
Detach
-11-
Battery-release Button
Attach