Evans PoulanPro Manual De Operador página 10

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

QUICK ASSEMBLY
• Loosen knob on upper handle.
Slowly pull engine Recoil starter handle.
• Slip starter rope into loop on upper
handle.
• Tighten Knob.
IMPORTANT: Before start your lawn
mower be sure to read the operator
manuals and all safety instructions
included in the package.
PREPARING THE ENGINE BEFORE STARTING
2. CHECK ENGINE OIL LEVEL
• Be sure lawnmower is level.
• Remove oil dipstick from oil fi ll spout.
• Pour oil slowly. DO NOT overfi ll.
• Insert and tighten dipstick, then remove it to check oil level.
IMPORTANT: Check oil level before each use. Add oil if needed.
Fill to "Full" line on dipstick.
anual_16HQ003 Poulan Walk Behind EN_SP_115847196-A_preprensa.indd Pliego 10 de 14 - Páginas (10, 19)
3. ADD GASOLINE
Fill fuel tank to bottom of tank fi ller neck. DO NOT overfi ll.
Use fresh, clean,regular unleaded gasoline with a minimum of 87
octane. DO NOT mix oil with gasoline. Purchase fuel in quantities
that can be used within 30 days to assure fuel freshness.
4. TO START THE ENGINE
• Hold the Operator Presence Control Bar down
to the upper handle.
• Pull the Recoil starter handle (at the end of
the starter rope) quickly.
• The mower it's ready for cutting
• To stop the engine, release the Operator presence control bar.
10

Publicidad

Tabla de contenido
loading

Tabla de contenido