EDM Product 07701 Guia De Inicio Rapido página 4

07701
REF.
INSTRUCCIONES / INSTRUÇÕES / INSTRUCTIONS / INSTRUCTIONS
Please read the instruction carefully before operating
Product Structure
· Battery cover
· Battery case
· Eject button (eject cork)
· LED light
· Drill button (drill cork)
· Main housing
· Corkscrew
· Foil cutter attachment
To Insert or Replace Battery
1. Twist to remove the battery cover anti-clockwise.
2. Insert 4x AA dry batteries into the case, observing the polarity markings in
the base.
3. Press down, twist clockwise and lock the cover.
Notice:
Please be aware that the incorrect polarity will cause the permanent impact
on the electronic parts.
07701
REF.
Operation
EN
1. Place the foil cutter on bottle neck, twist to remove
the foil.
2. Place the product over the bottle, and ensure the
drill at the center of the cork.
3. Grasp the bottle firmly, press Drill button until
the cork rise out completely.
4. Press Eject button to remove the cork from
the corkscrew.
Note: max. bottle neck diameter: 35mm.
Attention:
This appliance shall not be used by children.
Keep the product out of reach of children.
This product is not designed for commercial use.
Danger: never touch the corkscrew by the finger
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local Authority or retailer
for recycling advice
INSTRUCCIONES / INSTRUÇÕES / INSTRUCTIONS / INSTRUCTIONS
EN