Ducasa PTL BC 30 C Manual Del Usuario página 79

Type 1: Hung Window or Sliding Window Installation (optional)
1. Insert the window slider assembly into the window opening.
2. If desired, install the security bracket with two screws as shown.
3. Insert the window slider adaptor into the hole of the window slider.
Type 2: Wall Installation(optional)
1. Cut a 125mm (4.9inch) hole into the wall for the Wall Exhaust Adaptor B.
2. Secure the Wall Exhaust Adaptor B to the wall using the four Anchors and Screws
provided in the kit. 3.Connect the Exhaust Hose Assembly(with Wall Exhaust
Adaptor A) to the Wall Exhaust Adaptor B.
Expansion anchor
position
Wall Exhaust
Adaptor B
Adaptor cap
Note: Cover the hole using
the adaptor cap when not in
use
79