Omega Lift Equipment 15338 Instrucciones Originales página 3

TROUBLE SHOOTING
Jack won't lift load or full rated capacity
1.
Release valve may not be tightly closed - Check valve; close if necessary (see "instructions before use")
Jack may be low on oil - Check oil; add clean oil in necessary (see "instructions before use")
Jack may be air bound - Bleed system (see "instructions before use")
Jack lowers under load
2.
Release valve may not be tightly closed - Check valve; close if necessary (see "instructions before use")
Jack may be air bound - Bleed system (see "instructions before use")
Pump feels spongy
3.
Jack may be low on oil - Check oil; add clean oil in necessary (see "instructions before use")
Jack may be air bound - Bleed system (see "instructions before use")
Handle raises or flies back under load
4.
Jack may be air bound - Bleed system (see "instructions before use")
Jack can't lift full height
5.
Jack may be low on oil - Check oil; add clean oil in necessary (see "instructions before use")
Jack may be air bound - Bleed system (see "instructions before use")
Jack can't lower completely
6.
Moving parts in the lifting mechanism may need lubrication (see "instructions before use")
NOTE : If the above procedures can not solve the problem, the product should be taken to a local service center for further
examination.
GB
3