Publicidad
RECESSED MOUNTING
3. Put the first cabinet in the left facing rough opening and slide towards the center 2 x 6 frame support. Screw in the right side first,
then continue installing all screws into the structural frame. Make sure cabinet is plumb, square, and level.
4. Clean edge of cabinet with alcohol, allow to dry.
5. Peel paper backing from spacer and apply on cabinet box.
6. Verify door opens and closes properly.
7. Put the next cabinet in the right facing rough opening and push to the left against the spacer and 2 x 6 frame support. Screw in the
left side first, then continue installing all screws into the structural frame. Make sure cabinet is plumb, square, and level.
8. Complete installation using instructions supplied with cabinets.
3
7
© 2019 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
DETAIL A
UPLIFT 2 RECESSED GANGED INSTALLATION
UPLIFT 2 RECESSED GANGED INSTALLATION
5
3
Top View
Cabinet Box
Door frame, mirror
Part no. 209-1318-A rev. 08/21/19
Spacer
Ganging Kit
Publicidad
