Troubleshooting - Best Buy Easy Home TDT Compact Manual De Instrucciones

Instructions Manual

Troubleshooting

If you experience problems with this receiver or its installation, in the first instance please
read carefully the relevant sections of this User Manual and this Troubleshooting section.
Problem
No signal found
No picture or sound
Mosaic blocks in picture
or picture freezes
Scrambled channel
message
Forgotten channel
lock code
No response to
remote control
After moving the receiver
to another room, find
can't receive the digital
reception
5
All manuals and user guides at all-guides.com
Easy Home TDT Compact
Possible cause
Aerial is disconnected
Aerial is damaged/misaligned
Out of digital signal area
The Scart interface is not
connected hard
Tuned to digital teletex channel
Aerial may not be compatible
Channel is scrambled
Receiver off
Handset not aimed correctly
Infrared Receiver Module obstructed
Remote control batteries are inserted
incorrectly
Handset batteries exhausted
The aerial feed may come
through a distribution system
which may reduce the digital
signal now received by the receiver
What to do
Check aerial lead
Check aerial
Check with dealer
Reinsert the Scart STB to the TV set
Retune to another channel
Check aerial
Select an alternative channel
Re-install channels to cancel
channel lock
Plug in and turn on receiver
Aim handset at front panel
Check for obstructions
Check batteries direction
Replace remote control batteries
Try a direct feed from the
antenna