Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
8
www.electrolux.com
Heat setting
1 - 2
3 - 4
5
6 - 9
4.3 The heat setting
Touch
Touch
Touch
deactivate the cooking zone.
4.4 Activating and deactivating
the outer rings
You can adjust the surface you cook to
the dimension of the cookware.
Use sensor field:
To activate the outer ring: touch the
sensor field. The indicator comes on.
To activate more outer rings: touch the
same sensor field again. The subsequent
indicator comes on.
To deactivate the outer ring: touch the
sensor field until the indicator goes out.
When you activate the zone
but do not activate the outer
ring the light that comes out
from the zone may cover the
outer ring. It does not mean
that the outer ring is
activated. To see if the ring is
activated check the indicator.
5. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
5.1 Cookware
The bottom of the cookware
must be as thick and flat as
possible.
The hob deacti-
vates after
6 hours
5 hours
4 hours
1.5 hour
to increase the heat setting.
to decrease the heat setting.
and
at the same time to
4.5 The Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the
hob with
. Do not set the heat setting.
Touch
of the two front cooking zones
for 4 seconds.
comes on. Deactivate
the hob with
.
To deactivate the function: activate the
hob with
. Do not set the heat setting.
Touch
of the two front cooking zones
for 4 seconds.
comes on. Deactivate
the hob with
.
To override the function for only one
cooking time: activate the hob with
comes on. Touch
cooking zones for 4 seconds. Set the
heat setting in 10 seconds. You can
operate the hob. When you deactivate the
hob with
the function operates again.
Cookware made of
enamelled steel and with
aluminium or copper bottoms
can cause the colour change
on the glass-ceramic surface.
.
of the two front
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
