AKO-Agrartechnik BA-1038 Manual De Instrucciones página 5

Operating Instructions
1
2
3
5
1 Warning light (flashing = equipment switched on)
3 Earth connection
Fastening holes
5
Description of function
Put the equipment into service by connecting the plug to a mains outlet. If the warning light (1) flashes in
sync with the pulses, the equipment is working correctly..
If the warning light (1) does not flash after connection to mains,
please check for correct mains voltage and proper connection. If no problem can be found, have the
equipment checked by an expert.
Important Notes:
The equipment must be mounted on a vertical, non-flammable wall with the earth and fence connections
pointing downwards. See illustration above.
For outside installation the device must also be protected against exposure to rain and direct sunlight.
The equipment gives no warning if the electric fence is faulty.
Any user of electric fence systems is legally indebted to control the fence-appliance and the fence system
regularly, in accordance with the conditions of use, at least once per day.
visual check of the appliance and the fence system
-
measurement of the minimum voltage of 2500V at each point of the fence
-
This equipment carries a 3-year warranty in accordance with our Warranty Terms & Conditions!
Please see the attached Operating Instructions for safety tips, earthing, commissioning, warranty
terms and conditions and potential sources of fault!
SERVICE Addresses:
Please contact your specialist dealer
5
230 V
This energizer shall not be used as an animal
trainer (inside a barn).
4
2 Fence connection
4 Mains cable
3
6
~ connection!
-EN-
Version : 2017.1