Vitrifrigo DRW Serie Manual De Instalación página 53

The housing of the display have to be in the middle of the panel and not more than 80 mm from the top
of the panel.
Only for the DRW180A without inox panel is preferred to realize in the bottom of the panel an housing
for the two led lights as shown in the figure 5.18.
Place the display in its housing like shown in the example below:
Before the panel installing connect the cable of the display on the cable came from the drawer.
Turn on the unit and verify the correct functionality of the display.
Fig. 5.17
Fig. 5.18
Fig. 5.19
53
EN