Overheating Safeguard; Cleaning And Maintenance; Descaling - Create KETTLE RETRO Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 9
• WARNING: Make sure that you do not spill any water on the base.
4. Place the kettle on the base. Insert the plug in the wall socket. Push down the On/Off switch.
The pilot light will illuminate.
5. The kettle switches off automatically when the water has boiled. Now disconnect the kettle
from the main power supply. Always keep the lid closed when pouring the water out.
• WARNING: Be carefull you do not contact the hot water. It can cause serious burns.
OV E R HEATI N G SAF EGUARD
The kettle is fitted with an overheating safeguard. This will switch off the kettle if it is operated
without (sufficient) water. Allow the kettle to cool down for at least 10 minutes before using it
again.
• Remove the plug from the wall socket, and allow the appliance to cool.
• Clean the kettle with a damp cloth. Never immerse the appliance in water. Never put the ap-
pliance in a dishwasher. Make sure that the electrical connections do not become damp.
• If the interior of the kettle has become severely discoloured, then the best way to clean it is
with a damp cloth and a little washing soda. After cleaning, rinse it very thoroughly.
WARNING: Never use corrosive or scouring cleaning agents or sharp objects (such as knives or
hard brushes) to clean the appliance.
• Before cleaning, make sure that the appliance is not connected to the power supply and that
it has cooled down.
D E SCALIN G
• Lime will be deposited on the inside depending on the hardness of the water. For this reason
the appliance must be cleaned at regular intervals.
1. Remove the plug from the wall socket, and allow the appliance to cool.
2. The kettle is fitted with a descaling filter. This filter must be removed for cleaning. Press the
filter inward through the spout . The filter will spring loose. You can take it out through the
top opening by turning the kettle upside down.
3. Fill the kettle with a vinegar solution to the MAX level, and bring to the boiling point.
4. Leave the kettle with the vinegar solution to stand for a couple of hours.
5. Empty the kettle, fill with clean water to the MAX level, and bring to the boiling point. Empty
the kettle. Repeat this process twice.
WARNING: Never use ammonia or other products to descale the appliance. These can be inju-
rious to your health. Use solely a vinegar solution, or special descaling agents available from
retailers.
6. Place back the filter through the top opening and click it onto the spout.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in elec-
tric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package
indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that
have reached the end of their useful life must be given to waste disposal centres specialising in separate collection of
waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment,
on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the
environment and health and optimises the recycling and reuse of components making up the apparatus. Abusive disposal
of the product by the user involves application of the administrative sanctions according to the laws.
E NGL I SH
8

CLEANING AND MAINTENANCE

Publicidad

Tabla de contenido
loading

Productos relacionados para Create KETTLE RETRO

Tabla de contenido