Setting The Sound Focus Equalizer; Using Balance Adjustment - Pioneer SUPER TUNER III KEH-P7025 Operación Manual

Section
Audio Adjustments
06
Note
• If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
Setting the sound focus equal-
izer
Clarifying the sound image of vocals and instru-
ments allows the simple staging of a natural,
pleasant sound environment.
Even greater listening enjoyment will be
obtained if seating positions are chosen care-
fully.
• boosts the treble on the front output and
FRT1
the bass on the rear output.
boosts the treble and the bass on the front
FRT2
output and the bass on the rear output. (The
bass boost is the same for both front and rear.)
For both and
FRT1
more pronounced effect than the
1 Press to select the desired
SFEQ
mode.
(front1-high) —
FRT1-H
(front2-high) —
FRT2-H
(custom) —
CUSTOM
2 Press 2 or 3 to select the desired posi-
tion.
Press 2 or 3 until the desired position appears
in the display.
(left) —
LEFT CENTER
Notes
• If you adjust the bass or treble,
memorizes an
and treble are adjusted for personal prefer-
ence.
24
En
All manuals and user guides at all-guides.com
the setting provides a
FRT2 H
setting.
L
SFEQ
(front1-low) —
FRT1-L
(front2-low) —
FRT2-L
(off)
SFEQ OFF
(center) —
RIGHT
CUSTOM
mode in which the bass
SFEQ
• If you switch the
tion is automatically switched off. By switch-
ing the
H.P.F.
mode, you can combine
SFEQ
with
SFEQ

Using balance adjustment

You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.
1 Press
AUDIO
Press
AUDIO
• If the balance setting has been previously
adjusted,
Bal
2 Press 5 or ∞ to adjust front/rear speaker
balance.
Each press of 5 or ∞ moves the front/rear
speaker balance towards the front or the rear.
• –
Fad F15
speaker balance moves from front to rear.
• is the proper setting when only two
Fad 0
speakers are used.
• When the rear output setting is
you cannot adjust front/rear speaker balance.
Refer to Setting the rear output and subwoofer
controller on page 32.
3 Press 2 or 3 to adjust left/right speaker
balance.
When you press 2 or 3,
press of 2 or 3 moves the left/right speaker
(right)
balance towards the left or the right.
• –
Bal L9
speaker balance moves from left to right.
mode, the
SFEQ
function on after selecting the
H.P.F.
function.
to select .
Fad
until appears in the display.
Fad
will be displayed.
is displayed as the front/rear
Fad R15
is displayed. Each
Bal 0
is displayed as the left/right
Bal R9
func-
H.P.F.
function
,
Rear SP:S.W