Cleaning & Maintenance; Important - NuWave Brio 7.25Q Manual Del Propietário

CLEANING & MAINTENANCE
Cleaning
Clean the Brio after every use or in between batches. The
Base Tray and Air Circulation Riser have a non-stick coating.
Do not use metal utensils or harsh abrasives when cleaning
as these can damage the coating.
1. Unplug the appliance and make sure it cools completely.
2. Use a damp cloth to wipe the outside of the appliance.
3. Clean the Base Tray and inside components with a
nonabrasive sponge, hot water, and mild detergent.
Note: Remove the Base Tray and place it on a heat-
resistant surface to help cool the appliance faster. If using
the dishwasher for the Base Tray, Air Circulation Riser, and
Rack, use the top rack only.
Tip: If there is residual food on the Base Tray, Air Circulation
Riser, and Rack, add some hot water and let them soak
separately for about 10 minutes for easier cleaning. Then,
use a soft cleaning brush to remove any lingering food.
Storage:
1. Unplug the Brio and let it cool down completely.
2. Make sure that all the parts are clean and dry.
3. Push the power cord into the storage capsule. Affix the
cord by inserting it into the cord-affixing opening in the
back of the Brio.
IMPORTANT - Do not immerse
the Brio in water or attempt to
cycle the appliance through the
dishwasher. The outer surface
may be cleaned by wiping
carefully with a damp dishcloth
or sponge.
nuwavenow.com nuwavenow.com
23 23