INSTALLATION AND CIRCUIT - Fuel
IV-1-3-2 Water/Fuel separator filter
To protect the engine, a water/fuel separator filter is placed on the
NOTE:
fuel supply circuit.
WARNING
Changing the filter cartridge:
Comply with BOMBARD recommendations and filter manufacturer recommendations
Place a funnel and recovery bowl underneath the cartridge while it is being replaced. Before
changing the filter, make sure the fuel supply line pressure is released.
Please refer to the engine manufacturer's owner manual instructions.
Gasoline is a highly flammable product. TURN THE ENGINE OFF, disconnect the battery,
do not smoke and keep all naked flames well away while you proceed with the kit installation.
Place a funnel and bowl pan underneath the cartridge while it is being replaced.
Before changing the filter, make sure the fuel supply line pressure is released.
THE CARTRIDGE MUST BE CHANGED EVERY 50
HOURS USE
Page 19 of 35
E
N
G
L
I
S
H