Special Safety Instructions - Probuilder 43501 Manual De Instrucciones

Accessories
6 7 8
6. Pointed nozzle – concentrates the heat
and provides spot heating. Ideal for paint
stripping in hard to reach places.
7. Flat nozzle – distributes the heat to the
workpiece. Ideal for treating larger areas.
8. Re�ector nozzle – distributes heat around
the workpiece. Ideal for heat-shrinking or
bending plastic pipes.
9. Distributor nozzle – distributes heat
evenly around the workpiece. Ideal for
thawing water pipes.
10. Triangular scraper for use with all nozzles.
Ideal for scraping off paint in convex or
concave spaces.

Special safety instructions

• Read all the safety information and
instructions. Failure to observe the safety
information and follow instructions may
result in electric shock, �re and/or serious
injury. Save all warnings and instructions
for future reference.
• This heat gun is not intended for use
by children or persons with physical,
sensory or mental limitations or a lack
of experience or knowledge. This heat
gun can be used by children aged 8 or
older and by persons who have physical,
sensory or mental limitations or a lack
of experience or knowledge if a person
responsible for their safety supervises
them or has instructed them in the safe
9 bl
•
•
•
•
•
•
•
•
•
•
•
operation of the heat gun and they
understand the associated dangers.
Otherwise there is a risk of operating
errors and injury.
Supervise children during use, cleaning
and maintenance. This will ensure that
children do not play with the heat gun.
Handle the heat gun with care. The
heat gun produces intense heat which
increases the risk of �re and explosion.
Take particular care when working in the
vicinity of �ammable materials. The hot
air�ow or hot nozzle may ignite dust or
gases.
Do not work with the heat gun in
potentially explosive areas.
Do not aim the hot air�ow at the same
area for prolonged periods. Working with
plastic, paint, varnish or similar materials
may produce easily �ammable gases.
Please be aware that heat is directed to
covered �ammable materials, which may
ignite.
Safely place the heat gun on the
storage surfaces after use and let it cool
completely before packing it away. The
hot nozzle can cause damage.
Do not let children use the heat gun
unsupervised when it is switched on.
Store idle heat guns out of the reach of
children. Do not allow persons unfamiliar
with the heat gun or these instructions
to operate the tool. Heat guns can be
dangerous in the hands of untrained
users.
Do not expose the heat gun to rain or
wet conditions. Water entering a heat
gun increases the risk of electric shock.
Do not misuse the cable, for example by
using it to carry, hang up or unplug the
heat gun. Keep the cable away from heat
and oil. Damaged or entangled cords
increase the risk of electric shock.
GB
25