Descargar Imprimir esta página

Next Level Racing GTELITE MOTION KIT Manual De Instrucciones página 7

Publicidad

support@nextlevelracing.com
12b
Bolt through and secure with 3 x M8 Countersunk Bolts. Repeat on the other side. Skip to Step 14.
OPTIONAL INVERTED V3 MOTION SETUP
(USERS 160cm or BELOW)
13a
Align the countersunk holes on the Motion Brackets with the NLR Motion V3 mounting holes.
Repeat
on Other
Side
13b
Bolt through and secure with 3 x M8 Countersunk Bolts. Repeat on the other side.
PARTS:
• • 6 x M8 20mm COUNTERSUNK
BOLTS
MOUNTED VIEW
PARTS:
• • MOTION BRACKETS
PARTS:
• • 6 x M8 20mm COUNTERSUNK
BOLTS
MOUNTED VIEW
12
INVERTED MOTION V3 SETUP
14
Align the Motion V3 assembly with the T-Nuts previously installed in Step 10.
INVERTED MOTION V3 SETUP
15
Bolt through and secure with 4 x Washers and Ratchet Handles previously uninstalled in Step 03.
16
Align the T-Nuts previously installed into the Seat Slider Assemblies in Step 06 with the mounting
holes on the NLR Motion V3.
13
Video Instruction: bit.ly/nlrbuild
PARTS:
• • NIL
PARTS:
• • NIL
PARTS:
• • NIL

Publicidad

loading