GB
IE
Assembly
Pull out the mains plug.
This will prevent danger of injury
from electric shock.
The appliance is supplied with the
textile filter bag (
1. Attach the carrying handle
(2) firmly using the cross-head
screws (2a) supplied.
2. Attach the feet (7) and secure the
feet using the cross-head screws
(7a) supplied.
3. Insert the filter:
- Foam filter for wet vacuuming
(
15),
- Material filter (
vacuuming,
- Paper filter bag (
Never vacuum without a filter!
4. Place the motor housing (1) on
top of the dirt collector (6) and
close it with the clip (10).
5. Connect the vacuum hose (13)
(bayonet fixing) and the acces-
sories.
Operation
Fully unwind the suction hose (
13) before commencing work.
Switching on/off
Connect the mains plug.
Switching on the vacuum:
On/off switch (
Switching off the vacuum:
On/off switch (
20
16) fitted.
16) for dry
17).
3) in position "I"
3) in position "O"
Nozzle usage
Floor nozzle (
tachment (
19):
for wet and dry vacuuming of smooth sur-
faces and fitted carpets.
Floor nozzle (
attachment (
for wet and dry vacuuming of fitted carpets
and for removing persistent dirt.
•
Press the clips on the right and left side
of the floor nozzle (
the insert attachment (
Mind that sensitive surfaces might
get scratched if the insert attach-
ment is not used.
Crevice nozzle (
for vacuuming gaps, corners and radiators.
Wet vacuuming
1. For wet vacuuming or to vacuum wa-
ter, fit the foam filter (15) to the filter
basket (21).
To avoid tearing the foam filter (15):
- Use only a dry filter;
- Before inserting, twist the edge of
the filter slightly and then roll it back.
2. Suctioning up (draining) water: place
the suction hose (
(
14) into the water tank and suc-
tion up the water.
3. Empty the waste container immediately
after vacuuming because it is not de-
signed to store liquids (see "Cleaning/
Maintenance").
Never reach into the water to
be suctioned up. Danger of
electric shock.
18) with insert at-
18) without insert
19):
18) and remove
19).
20):
13) on the handle