Dry Vacuuming; Blowing; Cleaning/Maintenance; Cleaning & Maintenance - Parkside PNTS 1300 C3 Traducción Del Manual De Instrucciones Original

If the waste container is full, a float
closes the suction opening, and the
vacuum operation is interrupted.
Switch off the machine and empty
the waste tank.
If foam or liquid exits, switch off the
machine immediately.

Dry vacuuming

The appliance is supplied with the
textile filter bag (
For dry vacuuming, pull the material filter
(16) over the filter basket (21).
A fluted filter, which can be used
instead of the fabric filter included
in delivery, is optionally available
(see „Replacement parts/Accesso-
ries").
Vacuuming with the paper filter
bag:
To avoid the fluted filter becoming
clogged, we recommend the addi-
tional use of a paper filter bag.
Insert the material filter
1. Pull the material filter (16) over the fil-
ter basket (21).
Insert the paper filter bag
2. Fold down the side flaps (22) on the
paper filter bag (17) at the perforation.
3. Fit the paper filter bag (17) with the
short flap (22) upwards over the intake
connections (23) (see arrow
sealing ring (24) at the filter bag open-
ing must completely surround the lip
(25) on the suction pipe.
16) fitted.
). The
A fine dust filter bag made of micro
filter fleece is also optionally avail-
able, which can be used in place
of the included paper filter bag (see
"Replacement parts/Accessories").
Vacuuming fine dust:
Specific suction processes (e.g. grinding
of paints and lacquers, milling or drilling
walls, grinding or drilling hard wood) can
pose a risk from hazardous dust.
We recommend using the following option-
al filter combination, which is available,
for fine dust (see "Spare parts/Accesso-
ries"):
1. Folded filter which is used in stead of
the textile filter bag(16) included in the
scope of delivery.
2. Fine dust filter bag made of fleece,
which is used in stead of the paper
filter bag (17) included in the scope of
delivery.

Blowing

Operation without the use of a filter
is recommended.
To blow, plug the suction hose (13) onto
the connection (11) on the motor head.

Cleaning/Maintenance

Pull out the mains plug.
This will prevent danger of injury
from electric shock.
Always check the appliance before
use for any obvious faults such as
a defective mains cable, and have
these repaired or replaced.
GB IE
21