Use & Operation; Control Panel - Airalia AIR-DH20 Manual De Instrucciones

EN DE SP FR IT
Use & operation

Control panel

E D
F
G
H
I
J K L M
A - Power Button: Press this button to switch the dehumidifier ON or OFF. When the dehumidifier is ON,
the display screen (S) shows the current relative percentage of humidity.
B - Humidity Control Set: Press + or – to set the preferred relative humidity (RH) level between 30% and
80% in 5% increments during normal dehumidification mode. The dehumidifier will turn off when the room
reaches the target RH%.
C - Timer Control: Use this function to automatically switch the dehumidifier ON or OFF for a selected
period of time (between 1 and 24 hours). The selected period is displayed on the display screen (S).
Auto-Off Timer: Press the timer control button while the dehumidifier is on.
The display screen will flash. Press + or – to select on the display screen the number of hours you want
the dehumidifier to run before it switches off. Once the desired time is entered, wait for 5 seconds and the
timer indicator light (M) will light up to confirm the timer is set.
Auto-On Timer: Press the timer control button while the dehumidifier is off.
The display screen will flash. Press + or – to select on the display screen the number of hours before you
want the dehumidifier to start running. Once the desired time is entered, wait for 5 seconds and the timer
indicator light (M) will light up to confirm the timer is set.
Now you can adjust the speed of the dehumidifier fan (via button D) and the mode (via button E). If nothing
is selected, the previous speed and humidity setting will be used.
To disable the timer function after setting it up, press the timer control button twice.
8 20L Dehumidifier | Model AIR-DH20
C S B A
N O P Q R
D - Fan Speed: Use this function to set the dehumidifier extraction power to High or Low when in Normal mode.
E - Mode: Use this function to switch across the following modes of operation:
Laundry Mode
Use this mode to dry clothes more
quickly. The dehumidifier operates
continuously at maximum dehumidifying
capacity. Speed and humidity control set
functions are disabled in this mode.
Normal Mode
Use this mode to manually set the fan
speed (via button D) and the target
relative humidity (via button B). The
dehumidifier will turn off when the room
reaches the target RH%.
F - Laundry Mode Indicator: Indicates when Laundry Mode is selected.
G - Normal Mode Indicator: Indicates when Normal Mode is selected.
H - Ventilation Mode Indicator: Indicates when Ventilation Mode is selected.
I - Automatic Mode Indicator: Indicates when Automatic Mode is selected
J - Defrost Indicator: Indicates when the unit is defrosting (for more information, see the Defrosting
section)
K/L - Fan Speed Indicator: Indicates the power of the dehumidifier fan speed.
Low | High
M - Timer Indicator: Indicates when the timer has been set.
N - Temperature Indicator: Press and hold the + button (B) for 5 seconds until the temperature indicator
light comes on (°C). This will show the current room temperature on the display screen (S).
O - Humidity Indicator: Indicates when a target relative humidity % is set.
P - Target Humidity Indicator: Indicates when the target relative humidity % is reached.
EN DE SP FR IT
Ventilation Mode
In this mode, the air in the room is filtered via
the back air filter and vented back into the
room at the speed selected (via button D). This
mode does not use the dehumidifying function,
only the fan runs.
Automatic Mode
In this mode, the target relative humidity
is fixed at 55% and the speed of the fan is
controlled automatically:
• The fan speed is automatically set to High
when the room's relative humidity is higher
than 70% and until it is reduced to 67%.
• The fan speed is automatically set to Low
when the room's relative humidity is lower
than 67% and until it reaches 55%
20L Dehumidifier | Model AIR-DH20 9