Specifications; Product Specifications; Maintenance; Pressure Washer Maintenance - Craftsman 580.752850 Manual Del Operador

SPECIFICATIONS

PRODUCT SPECIFICATIONS

Pressure Washer Specifi cations
Outlet Pressure . . . . . . . . . . . . . . .1700 PSI (117.2 BARS)*
Flow Rate . . . . . . . . . . . . . . . . . . . . . . . 1.3 GPM (4.9 LPM)*
Detergent Mix . . . . . . . . . . . . . . . . . See MFR's Instructions
Water Supply Temperature . . . . Not to exceed 100°F (38°C)
Motor . . . . . . . . . . . . . . . . . . . . . . . . Universal (brush) Type
Rated Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Volts AC
Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.5 Amps
* This pressure washer is rated in accordance to the
Pressure Washer Manufacturers Association (PWMA)
standard PW101-2010 (Testing and Rating Performance of
Pressure Washers).

MAINTENANCE

OWNER'S RESPONSIBILITIES
General Recommendations
Regular maintenance will improve the performance and
extend the life of the pressure washer. See any Sears or other
qualifi ed service dealer for service.
The pressure washer warranty does not cover items that have
been subjected to operator abuse or negligence. To receive
full value from the warranty, the operator must maintain
pressure washer as instructed in this manual including
proper storage as detailed in Storage.
Before Each Use
1. Clean debris.
2. Check water inlet screen for debris or damage.
3. Check high pressure hose for leaks.
4. Check spray gun operation.

PRESSURE WASHER MAINTENANCE

Clean Debris
Daily or before use, clean accumulated debris from electric
pressure washer. Inspect cooling air slots and openings on
the front, rear and bottom of the electric pressure washer.
These openings must be kept clean and unobstructed.
The electric pressure washer parts should be kept clean to
reduce the risk of overheating and ignition of accumulated
debris.
• Use a damp cloth to wipe exterior surfaces clean.
NOTICE Improper treatment of the electric pressure washer
can damage it and/or shorten its life.
• DO NOT insert any objects through cooling slots.
14