Assemble Main Unit - Craftsman 580.752850 Manual Del Operador

Assemble Main Unit

1. Remove and discard the protective cap (A) from each
wheel shaft.
NOTICE During shipment wheel tabs may compress
inward. If so, gently spread tabs outward.
2. Slide wheel shafts (B) into holes at sides of main unit (F).
Wheels are installed correctly when you hear a CLICK and
they are securely in place.
C
B
A
F
3. Install decorative shield (C) if equipped, and secure using
two screws.
NOTICE As the screws are turned in, they will break
through the front of the unit allowing you to secure the
decorative shield.
4. Slide the handle (D) into the slots at top of main unit.
Install two (2) screws to secure the handle to the main
unit.
5. Slide accessory tray (E) into slots at back of main unit.
Install two (2) screws to secure the accessory tray to the
main unit.
B
7
D
E