Shark Rocket HV370 Serie Guia Del Propietario página 6

MAINTENANCE
CHECKING FOR BLOCKAGES
CHECK HANDHELD
Remove the wand from the handheld vacuum and
check all dust cup intake openings.
CHECK FLOOR NOZZLE
Detach the wand. Turn the floor nozzle over and use
the edge of a coin to open the three locks on the
bottom of the floor nozzle.
Tilt back the neck of the nozzle and check openings
for blockages. To reinstall the cover, line it up, then
press down until it clicks into place. Use the edge of
a coin to close the three locks on the bottom of the
nozzle.
s h a r kc l e a n . c o m
CHECK WAND
Detach the wand and check it for blockages.
MAINTENANCE
CLEANING THE BRUSHROLL
To access the brushroll, flip the floor nozzle over and
use the edge of a coin to open the three locks on the
bottom of the floor nozzle.
1
Run scissors along the groove in the brushroll to
cut or clear away any string, carpet fibers, hair, or
other debris.
To reinstall the cover, line it up, then rotate down
until it clicks into place. Use the edge of a coin to
close the three locks on the bottom of the nozzle.
s h a r kc l e a n . c o m
2