Aqara P1 Manual De Uso página 7

6m
*Recommended installation height is 1.2-2 m. The detection scope gets
smaller if it is lower than 1.2 m. There will be a blind zone at the bottom of
the motion sensor if it is installed higher than 2 m.
Direct Installation
1.Choose an appropriate installation position and make
sure the installation surface is clean and flat.
2.Put the sticker on the bottom of the battery cover,
determine the detection direction, stick it to the desired
installation position, and press hard and evenly for 30 s to
make sure it sticks firmly.
Effective detection area: Top view
0m
7m
04
6m