Titan Controls Kronus 4 Manual De Instrucciones

®
Kronus
Temperature, Humidity, CO
Day and Night Controller
Easy Guide
VANCOUVER, W ASHINGTON U.S.A.
Instructions for Use
1. Mount Kronus
from moisture, sprays, pesticides, etc.
2. Plug CO Controller (Atlas
²
into the "CO Output" outlet.
²
3. Turn the CO Controller or CO
²
4. Plug fan into the "Exhaust Fan Output" outlet.
5. Turn exhaust fan 'ON' to the highest setting.
4
®
6. Plug dehumidifier into the "Dehumidifier Output" outlet.
7. Turn dehumidifier 'ON' to the highest setting.
,
8. Plug circulation fan, night light, etc. into the
²
"Night Only Output"
9. Turn circulation fan, night light, etc. 'ON' to the
appropriate setting.
10. Place remote sensor in grow area at plant canopy height.
11. Set the 'Temperature' and 'Humidity' control
dials at the preferred temperature and humidity
levels for your garden.
12. Plug the Kronus
Note: A surge protection device is recommended.
13. Turn Kronus 4 to the
®
"ON" position.
14. The Kronus ® 4 will now activate
and deactivate the equipment
based on your preferred settings.
Controller
Specifications
Size: 9.5" H x 8.5" W x 2.5" D
Weight: 3 lbs.
Voltage Input: 120 Volts
Voltage Output: 120 Volts
Maximum Amperage: 15 Amps
Hertz: 60 Hz
Min/Max Humidity Control
Level: 40% RH to 90% RH
(non-condensing)
Humidity Accuracy: +/- 5%
4 in a secure area, but away
®
1) or CO Timer (Apollo
® ®
²
Timer "ON".
²
4 into a 120 Volt/15 Amp outlet.
®
CO Regulator
2
& Tank
Min/Max Temperature Control Level: 45°
to 95°F (7° - 35°C)
Temperature Accuracy: +/- 2°
1)
Cord set: 6 foot/14 AWG
Storage Temperature: 32° to 120° F (0° - 49°C)
Operating Temperature: 45° to 95° F (7° – 35° C)
www.titancontrols.net
For technical assistance call us at
1-888-80-Titan or 1-888-808-4826.
Controlling a CO
Generator, Circulation Fan,
Exhaust Fan, & Dehumidifier
®
Tank or CO
² ²