Rear View - Steelcase Ology Instrucciones De Montaje

®
4.
Remove shipping top (4a) and shelf, if present,
by pulling shelf out towards front.
5.
Remove angle brackets from back side
of inner back and discard brackets and
screws.
NOTE: Bracket quantity varies depending on length
6.
Remove inner back from case assembly
by pulling out of clips (6a) and lifting pins out
of holes (6b).
7.
Remove Back Panel (if present). Retain
screws to reattach in Step 18.
8.
Align back of end panels with back
of top.
9.
Secure unit to bottom side of top by
installing (8) tapping screws provided
in the installation kit.
4a
5

REAR VIEW

BACK EDGE OF TOP
7
8
4
INNER BACK
6b
6a
TAPPING SCREW -
TRH, SERR, 10-12 X .625
9
BOTTOM SIDE
OF TOP
Page 4 of 33
92555 Rev F